3 steps to coat your deck - long weekend DIY!

 
 

The Easter Long Weekend is here, therefore it's the prime-time for home improvements and outdoor entertaining. So why not tackle those odd jobs and DIY tasks around the home that you have been putting off!

Just in time for the 4 day weekend Cabot’s have released a decking product called the 'Finish in 1 Day system' - turning what is usually a six-week gruelling and time consuming process into a one-day job, yes ONE DAY! This fantastic new product means long-term updates are now much faster, giving you more time for outdoor lounging and entertaining on your fresh deck!

There is a 'Step by Step guide' below as well as a super helpful 'how to' video!

 
Cabots39.jpg
 

Step 1


Take your Cabot’s New Timber Prep and apply it evenly to the boards with your Cabot’s Deck Prep Scrubbing Brush.

New Timber Prep imitates the exact effects of weathering, by drawing out the timber’s tannins and oils. 

After 15 minutes, rinse away the residue with a hose, leaving the surface ready for coating.

 
 

Step 2

Immediately clean the timber with Cabot’s Deck Clean.

Cabot’s Deck Clean should be mixed with water (1:4 parts) and applied to the timber’s surface using a bristle brush, like Cabot’s Deck Prep Scrubbing Brush.

After 20 minutes, it should be rinsed off with a high-pressure hose.

 
Cabots27.jpg
 

Step 3

Once the deck is dry, it is ready for coating.

Stir the Cabot’s Aquadeck to ensure that the colour is well mixed and even.Start by carefully cutting in around the edges of the deck with a paintbrush. Apply oil to three or four boards at a time using the Cabot’s Deck Coat Applicator.

Always work along the whole length of a board to a natural break to prevent patchy results.

Allow 1 hour to dry for the first coat and then reapply.

 
 
Source: The Easter Long Weekend is here, ...